Various stuff that doesn't warrant it's own repo.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 

4357 lines
130 KiB

# generated by Slic3r 1.2.9 on Mon Aug 20 16:46:03 2018
[filament:RF1000_ABS300_100_04]
bed_temperature = 120
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 140
first_layer_temperature = 270
max_fan_speed = 40
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_ABS300_125_05]
bed_temperature = 110
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.05
fan_always_on = 0
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 145
first_layer_temperature = 270
max_fan_speed = 40
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_ABS300_200_05]
bed_temperature = 110
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.05
fan_always_on = 0
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 145
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 0
min_print_speed = 15
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_ABS300_200_05_VASE]
bed_temperature = 110
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.25
fan_always_on = 0
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 145
first_layer_temperature = 270
max_fan_speed = 40
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 10
temperature = 265
[filament:RF1000_ABS300_300_05]
bed_temperature = 110
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.05
fan_always_on = 0
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 145
first_layer_temperature = 270
max_fan_speed = 40
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_HIPS300_200_05]
bed_temperature = 135
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 5
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 20
filament_diameter = 3,7
first_layer_bed_temperature = 135
first_layer_temperature = 265
max_fan_speed = 20
min_fan_speed = 5
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_Iglidur300_200_05]
bed_temperature = 120
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 10
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 10
filament_diameter = 3,7
first_layer_bed_temperature = 140
first_layer_temperature = 265
max_fan_speed = 30
min_fan_speed = 0
min_print_speed = 15
slowdown_below_layer_time = 8
temperature = 260
[filament:RF1000_LAYBRICK300_200_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 2.85,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 225
[filament:RF1000_LAYWOOD300_200_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 2.85,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 220
[filament:RF1000_NinjaFlex300_200_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 225
[filament:RF1000_PLA175_200_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 1.75,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 220
[filament:RF1000_PLA300_100_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF1000_PLA300_125_04]
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 210
[filament:RF1000_PLA300_125_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF1000_PLA300_125_05_VASE]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1.4
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 225
[filament:RF1000_PLA300_150_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF1000_PLA300_200_04]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF1000_PLA300_200_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 20
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF1000_PLA300_200_05_FAST]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 25
min_print_speed = 25
slowdown_below_layer_time = 5
temperature = 220
[filament:RF1000_PLA300_200_05_VASE]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1.4
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 25
slowdown_below_layer_time = 8
temperature = 225
[filament:RF1000_PLA300_300_05]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 20
slowdown_below_layer_time = 8
temperature = 215
[filament:RF2000_ABS300_200_04_D]
bed_temperature = 120
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3
first_layer_bed_temperature = 120
first_layer_temperature = 270
max_fan_speed = 50
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 5
temperature = 265
[filament:RF2000_ABS300_200_04_S]
bed_temperature = 110
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3,7
first_layer_bed_temperature = 130
first_layer_temperature = 270
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 8
slowdown_below_layer_time = 8
temperature = 265
[filament:RF2000_Iglidur300_200_05]
bed_temperature = 120
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 10
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFFF
filament_diameter = 3,7
first_layer_bed_temperature = 140
first_layer_temperature = 265
max_fan_speed = 35
min_fan_speed = 0
min_print_speed = 15
slowdown_below_layer_time = 8
temperature = 260
[filament:RF2000_PLA300_100_04_S]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 0.9
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 70
min_print_speed = 5
slowdown_below_layer_time = 8
temperature = 195
[filament:RF2000_PLA300_200_04_D]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 70
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 205
[filament:RF2000_PLA300_200_04_S]
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 3,7
first_layer_bed_temperature = 60
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 70
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 210
[filament:RF500_ABS175_100_04]
bed_temperature = 95
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 5
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 120
first_layer_temperature = 270
max_fan_speed = 10
min_fan_speed = 0
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 265
[filament:RF500_ABS175_200_04]
bed_temperature = 95
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 5
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 120
first_layer_temperature = 270
max_fan_speed = 10
min_fan_speed = 0
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 265
[filament:RF500_PLA175_050_04]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 0.95
fan_always_on = 1
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 0
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 205
[filament:RF500_PLA175_100_04]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 0.85
fan_always_on = 1
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 0
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 205
[filament:RF500_PLA175_100_04_Vase]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1.1
fan_always_on = 1
fan_below_layer_time = 50
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 0
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 210
[filament:RF500_PLA175_200_04]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 0.95
fan_always_on = 1
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 0
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 205
[filament:RF500_PLA175_300_04]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 40
filament_colour = #FFFFFF
filament_diameter = 1.75,7
first_layer_bed_temperature = 0
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 8
temperature = 210
[presets]
filament = RF500_PLA175_200_04.ini
print = RF500_ABS175_100_04.ini
printer = RF2000_PLA300_200_04_S.ini
[print:RF1000_ABS300_100_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1.1
bridge_speed = 30
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 70%
gap_fill_speed = 5
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 30
interface_shells = 0
layer_height = 0.1
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 3
small_perimeter_speed = 10
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 4
top_infill_extrusion_width = 100%
top_solid_infill_speed = 20
top_solid_layers = 8
travel_speed = 80
[print:RF1000_ABS300_125_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 6
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.6
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.125
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 100%
top_solid_infill_speed = 25
top_solid_layers = 6
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_ABS300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.6
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 100%
top_solid_infill_speed = 20
top_solid_layers = 4
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_ABS300_200_05_VASE]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 35
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 100%
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.6
fill_angle = 25
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 35
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.6
perimeter_speed = 35
perimeters = 1
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 30
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 35
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 35
support_material_threshold = 50
thin_walls = 0
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 30
top_solid_layers = 0
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_ABS300_300_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.6
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 30
interface_shells = 0
layer_height = 0.3
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 100%
top_solid_infill_speed = 25
top_solid_layers = 3
travel_speed = 130
[print:RF1000_HIPS300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 35
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.6
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 35
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 35
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 30
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 35
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 35
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 100%
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_Iglidur300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 20
top_solid_layers = 5
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_LAYBRICK300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 40
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 40
interface_shells = 0
layer_height = 0.2
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 2
small_perimeter_speed = 35
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 40
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 130
[print:RF1000_LAYWOOD300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 40
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 65%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 40
interface_shells = 0
layer_height = 0.2
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 2
small_perimeter_speed = 35
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 40
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 130
[print:RF1000_NinjaFlex300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 80%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 25
interface_shells = 0
layer_height = 0.2
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 20
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 20
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 25
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 25
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 20
top_solid_layers = 5
travel_speed = 130
[print:RF1000_PLA175_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.3
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 40
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 35
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 40
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_100_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 8
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 15
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.1
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 40
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 35
top_solid_layers = 8
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_125_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 6
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 15
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 45
interface_shells = 0
layer_height = 0.125
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 40
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 35
top_solid_layers = 6
travel_speed = 130
[print:RF1000_PLA300_125_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 6
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 15
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.125
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 40
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 35
top_solid_layers = 6
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_125_05_VASE]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 100%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 55
interface_shells = 0
layer_height = 0.125
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 55
perimeters = 1
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 55
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 55
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 55
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 40
top_solid_layers = 0
travel_speed = 130
[print:RF1000_PLA300_150_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 6
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 15
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.15
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 40
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 35
top_solid_layers = 6
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_200_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 50
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 45
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 50
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 40
top_solid_layers = 4
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 50
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 45
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 50
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 40
top_solid_layers = 4
travel_speed = 130
xy_size_compensation = 0
[print:RF1000_PLA300_200_05_FAST]
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 50%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 70
interface_shells = 0
layer_height = 0.2
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 70
perimeters = 1
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 55
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 65
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 70
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 45
top_solid_layers = 4
travel_speed = 150
[print:RF1000_PLA300_200_05_VASE]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_speed = 100%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 55
interface_shells = 0
layer_height = 0.2
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 55
perimeters = 1
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 55
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 55
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 55
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 220%
top_solid_infill_speed = 40
top_solid_layers = 0
travel_speed = 130
[print:RF2000_ABS300_200_04_D]
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.5
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 25
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 1
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 10
skirt_height = 1
skirts = 1
small_perimeter_speed = 25
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 25
spiral_vase = 0
standby_temperature_delta = 0
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 25
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 100%
top_solid_infill_speed = 25
top_solid_layers = 3
travel_speed = 130
xy_size_compensation = 0
[print:RF2000_ABS300_200_04_S]
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.5
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 210%
top_solid_infill_speed = 20
top_solid_layers = 3
travel_speed = 130
xy_size_compensation = 0
[print:RF2000_Iglidur300_200_05]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 10
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 25
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 30
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 20
top_solid_layers = 5
travel_speed = 130
xy_size_compensation = 0
[print:RF2000_PLA300_100_04_S]
avoid_crossing_perimeters = 0
bottom_solid_layers = 10
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 60%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.3
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 2
small_perimeter_speed = 40
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 35
top_solid_layers = 10
travel_speed = 120
xy_size_compensation = 0
[print:RF2000_PLA300_200_04_D]
avoid_crossing_perimeters = 1
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 25
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 1
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 45
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 10
skirt_height = 1
skirts = 1
small_perimeter_speed = 40
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 45
spiral_vase = 0
standby_temperature_delta = 0
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 45
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 35
top_solid_layers = 5
travel_speed = 130
xy_size_compensation = 0
[print:RF2000_PLA300_200_04_S]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_width = 5
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.3
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 45
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 45
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 0
small_perimeter_speed = 40
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 45
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 215%
top_solid_infill_speed = 35
top_solid_layers = 5
travel_speed = 130
xy_size_compensation = 0
[print:RF500_ABS175_100_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 10
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 200%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 25
interface_shells = 0
layer_height = 0.1
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 25
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 4
small_perimeter_speed = 25
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 25
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 35
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 240%
top_solid_infill_speed = 25
top_solid_layers = 10
travel_speed = 120
xy_size_compensation = 0
[print:RF500_ABS175_200_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 10
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 200%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 25
interface_shells = 0
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 25
perimeters = 2
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 4
small_perimeter_speed = 25
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 25
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 50
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 240%
top_solid_infill_speed = 25
top_solid_layers = 5
travel_speed = 120
xy_size_compensation = 0
[print:RF500_PLA175_050_04]
avoid_crossing_perimeters = 0
bottom_solid_layers = 35
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 15%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.35
first_layer_speed = 60%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 40
interface_shells = 0
layer_height = 0.05
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 30
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 4
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 20
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 6
support_material_speed = 50
support_material_threshold = 50
thin_walls = 1
threads = 2
top_infill_extrusion_width = 240%
top_solid_infill_speed = 30
top_solid_layers = 35
travel_speed = 120
xy_size_compensation = 0