hardware test hello world

master
brunotic 3 years ago
parent 5c6b25f9cf
commit 29e6db9d38
  1. 49
      Software/sketch_hardware_test/sketch_hardware_test.ino

@ -1,9 +1,48 @@
void setup() {
// put your setup code here, to run once:
}
#include <Arduino.h>
#include <U8g2lib.h>
#ifdef U8X8_HAVE_HW_SPI
#include <SPI.h>
#endif
#ifdef U8X8_HAVE_HW_I2C
#include <Wire.h>
#endif
U8G2_ST7920_128X64_1_HW_SPI u8g2(U8G2_R0, /* CS=*/ 10, /* reset=*/ 8);
void setup(void) {
/* U8g2 Project: SSD1306 Test Board */
//pinMode(10, OUTPUT);
//pinMode(9, OUTPUT);
//digitalWrite(10, 0);
//digitalWrite(9, 0);
void loop() {
// put your main code here, to run repeatedly:
/* U8g2 Project: T6963 Test Board */
//pinMode(18, OUTPUT);
//digitalWrite(18, 1);
/* U8g2 Project: KS0108 Test Board */
//pinMode(16, OUTPUT);
//digitalWrite(16, 0);
/* U8g2 Project: LC7981 Test Board, connect RW to GND */
//pinMode(17, OUTPUT);
//digitalWrite(17, 0);
/* U8g2 Project: Pax Instruments Shield: Enable Backlight */
//pinMode(6, OUTPUT);
//digitalWrite(6, 0);
u8g2.begin();
}
void loop(void) {
u8g2.firstPage();
do {
u8g2.setFont(u8g2_font_ncenB10_tr);
u8g2.drawStr(0,24,"Hello World!");
} while ( u8g2.nextPage() );
//delay(1000);
}
Loading…
Cancel
Save